• FGXF玻璃鋼管道斜流通風機

  FGXF型玻璃鋼管道斜流風機為鼓形結構，其進出口小的特點加快了氣流速度、壓力系數高。同一般軸流式風機同型號的情況下，其流量、壓力均大于軸流式風機。該系列風機替代低壓式風機，節能投資和占地、簡化設計、安全安裝。在軸流式風機壓力滿足不了的管道通風場合，使用斜流式管道風機是最佳的選擇。具有重量輕、耐腐性能良好、不易老化、噪音低等特點。廣泛應用于工礦企業、賓館、博物館、體育館、化工、實驗室、環保配套設備等場所管道加奪壓、抽排風使用。所輸送氣體不允許含有粘性物質、其所輸送氣體粉塵及硬質顆?！?50mg/m³、氣體溫度≤60℃、相對濕度≤100%。

• FGXF FRP pipe oblique flow fan series

  FGXF type glass fiber reinforced plastic /polypropylene slanting fan is a drum type structure. Its small import and export features speed up the speed of air flow and high pressure coefficient. With the same type of axial fan, the flow and pressure of the fan are greater than that of the axial flow fan. This series of fans replace the low pressure fan, energy saving investment and land occupation, simplified design, safe installation. In the pipe ventilation where the axial flow fan is unable to meet the pressure, the use of the inclined flow duct fan is the best choice. It has the characteristics of light weight, good corrosion resistance, not easy aging, low noise and so on. It is widely used in industrial and mining enterprises, hotels, museums, gymnasiums, chemical, laboratory and environmental protection facilities. The gas is not allowed to contain the viscous material, conveying gas dust and hard particles less than 150mg/m³, gas temperature are less than 60, the relative humidity is less than 100%.

產品為人工實物測量會有一定誤差，相關數據僅作參考，以收到的實物為準。 單位Unit: mm(毫米）